Alcantara & Fabric Cleaner 500 ml

For the efficient and gentle cleaning of Alcantara, synthetics and natural fibres in upholstery and carpets. Also suitable for all types of synthetic fibre and natural fibre.

Fabrics like Alcantara and Amaretta are ultra-microfibre materials (synthetic materials) which have a surface like suede.

These fabrics should be vacuumed at regular intervals and occasionally wiped with a damp cloth. COLOURLOCK Alcantara & Fabric Cleaner is ideal for removing dirt and stains from Alcantara car and furniture upholstery.

Cleaning big surfaces: Wet the stained surface slightly with COLOURLOCK Alcantara & Fabric Cleaner and immediately wipe gently with a terry cloth. Repeat as necessary.

Removing stains: Wet a sponge or a soft brush with some cleaner. Press the foam out of the sponge. Clean the stained area in a circular motion. Then wipe with a damp cloth. Don`t rub too hard or make it too wet. If stains prove difficult to remove, you are advised to consult a professional upholstery cleaner to avoid damaging the material.

Fresh stains should be absorbed immediately with an absorbent, clean cloth. Either dab or work from outside of the stain to the centre. Do not rub too hard. With larger stains, work from seam to seam.

For greasy and waxy stains use COLOURLOCK Degreaser. Work carefully. Test in a hidden area first.

To reduce future soiling and stains, protect the surface with COLOURLOCK Waterproofing for Leather & Textiles. Keep heat away from Alcantara. For example cigarette burns can cause irreparable damage.

Alcantara is prone to pilling. Abrasion causes the fibres to develop into small spherical nodules. If the surface is not too damaged, it can be restored with the COLOURLOCK Sanding Pad. But if the material is too badly damaged, it has to be replaced.
 

Application

Always test any products first on a hidden area in case they affect the colour.

1. Spray the area
2. Wipe with terry
3. In case of stains, use a sponge and press cleaning foam
4. Clean the stains circularly with the foam

Shake bottle before use. Apply some cleaner on a sponge and press the foam out of it. Clean the surface in a circular motion. If necessary,repeat treatment after drying. Then rub with a slightly moistened cloth.

Cleaning of large surfaces: Slightly moisten the soiled surface with the Cleaner and immediately soak up with a terry cloth. Repeat as necessary.
 
Removal of stains: Apply the Cleaner to a sponge or soft brush. Clean the surface in a circular motion. Rub with a slightly moistened cloth.. Do not rub too harshly and do not apply too much liquid.
 
Stains which resist removal should be referred to a professional upholstery cleaner or car valeting service, rather than risking superficial damage by cleaning attempts using products which are too intense.